How to Select the Ideal Wheel Spacers for a Subaru BRZ to Enhance Stance and Handling?

When you want to enhance the stance and handling of your Subaru BRZ, there are various modifications you may consider. However, one of the simplest and most effective ways to achieve this is by using wheel spacers. The right wheel spacers can significantly improve your vehicle’s performance, handling, and aesthetic appeal. It’s important to note that not all wheel spacers are the same, and choosing the right fit for your Subaru BRZ is crucial. In this article, we will guide you through the process of selecting the perfect set of wheel spacers for your vehicle.

Understanding Wheel Spacers

Before we delve into the selection process, it’s essential to understand what wheel spacers are and their purpose. They are simple devices typically made from aluminium or steel that fit between the vehicle’s hub and the wheel. They essentially push your wheels slightly outwards, increasing the distance between the wheel and the hub.

A lire également : How to Choose and Install High-Flow Fuel Injectors for a Chevrolet Corvette C7 Z06?

This modification does more than just give your Subaru BRZ a more aggressive stance. It also enhances your vehicle’s handling and stability. By increasing the vehicle’s track width, or the distance between the left and right wheels, wheel spacers improve the balance of the vehicle, making it less likely to roll over during sharp turns.

Aspects to Consider When Selecting Wheel Spacers

Selecting the perfect wheel spacers for your Subaru BRZ involves several key factors. The first aspect to consider is the thickness of the spacer. This is measured in millimeters and typically ranges from 3mm up to 25mm. The ideal thickness for your vehicle depends on your specific needs and preferences. For instance, if you want to achieve a wider stance, you may opt for thicker spacers. However, be aware that excessively thick spacers may lead to premature bearing wear.

A voir aussi : Can Upgrading the Transmission Fluid Cooler Extend the Life of a Performance Car’s Gearbox?

Another key factor to consider is the material of the wheel spacer. As mentioned earlier, most spacers are made from aluminium or steel. Aluminium spacers are lightweight and offer excellent resistance against corrosion. On the other hand, steel spacers are sturdier and more durable but are also heavier.

Subaru Models and Their Wheel Spacer Requirements

Subaru offers an impressive lineup of vehicles, each with its own unique wheel spacer requirements. For instance, the Subaru Forester, popular for its off-roading capabilities, may require different spacers than the sleek and sporty BRZ. Here’s a quick look at some popular Subaru models and their wheel spacer specifications:

Subaru BRZ – The BRZ tends to be a lower model with a wider base, hence requiring wider spacers for the best stance and handling.

Subaru Impreza – This model typically has more space in its wheel arches, and hence, can accommodate thicker spacers without much issue.

Subaru Forester – Being an SUV, the Forester has bigger wheels and may require thicker spacers for better off-road handling.

Selecting Hubcentric Wheel Spacers

For your Subaru BRZ, we recommend selecting hubcentric wheel spacers. These spacers come with a lip that fits snugly into the wheel hub, ensuring that the load of the vehicle is adequately supported. This design also ensures that the wheels are perfectly centered with the hub, leading to smoother and more stable rides.

Moreover, when selecting hubcentric spacers, ensure that they come with extended wheel studs or lug nuts. The original studs may not be long enough to secure the wheels once the spacers are installed, making extended studs a necessity.

Price Considerations

The price of wheel spacers for your Subaru BRZ can vary greatly depending on a few key factors. These include the brand, material, and thickness of the spacers. While it might be tempting to opt for cheaper options, remember that the safety and performance of your vehicle are at stake. It is always advisable to invest in high-quality spacers from reputable brands. These may cost more upfront but they provide better value in the long run, thanks to their superior durability and performance.

Unfortunately, we don’t have the space to wrap up our discussion on selecting the perfect wheel spacers for your Subaru BRZ. However, armed with this guide, you’re now ready to make a well-informed decision. Remember, the ultimate goal is to enhance your vehicle’s stance and handling, so choose the spacer that best suits your specific requirements and preferences. The perfect spacer is out there, ready to transform your Subaru BRZ’s performance and stance.

Installation Process of Wheel Spacers

Before you go ahead and purchase your wheel spacers for the Subaru BRZ, it’s essential to have a general understanding of the installation process. Knowing this can help ensure a smooth operation and prevent any potential issues.

To install wheel spacers, first, ensure the car is on a flat surface and apply the handbrake to secure the vehicle. You then need to loosen the wheel lug nuts before lifting the car using a jack. Remove the wheel and place the wheel spacer onto the hub. It should fit perfectly if you’ve chosen well.

Next, secure the spacer using the supplied bolts or extended wheel studs. If your wheel spacers require extended studs, you’ll need to replace the original ones. This process requires more work and may necessitate professional help. After securing the spacer, reinstall the wheel and tighten the lug nuts. Repeat this process for each wheel.

Remember to re-torque the lug nuts after a few miles of driving. This step is crucial as it further ensures the spacers are securely attached to the hub and reduces the risk of them becoming loose while driving.

Conclusion: Enhance Your Subaru BRZ with the Perfect Wheel Spacers

With the insights provided in this article, you are now well-equipped to select the ideal wheel spacers for your Subaru BRZ. Remember, the perfect spacers will depend on several factors including your vehicle’s model, your personal preferences, and the specific requirements of your vehicle. For instance, while the Subaru Forester may require thicker spacers for better off-road handling, your BRZ may need wider spacers for the best stance and handling.

When buying your spacers, don’t compromise on quality for the sake of saving a few bucks. Since safety is paramount, always choose high-quality, hubcentric wheel spacers made from durable materials. These spacers may cost more upfront, but they offer better value in the long run thanks to their superior durability and performance.

Finally, always ensure that the installation process is done correctly. If you’re not confident in your ability to do it yourself, consider seeking professional help. A proper installation not only enhances the performance and safety of your vehicle but also increases the lifespan of your wheel spacers.

In conclusion, selecting the right wheel spacers for your Subaru BRZ is a straightforward process once you understand the basics. So go ahead and upgrade your vehicle stance and handling, and enjoy a smoother, safer, and more aesthetically pleasing ride.